Rane ECS RaneWare - Manual (Page 29)

RW Manual-29
SNPL Stored Name Parameter List (SNPL):
Index
Hex Parameters Encoding Method
00-08 $00-$08 Output Name 1 8 (char)
09-16 $09-$10 Output Name 2 8 (char)
17-24 $11-$18 Output Name 3 8 (char)
25-32 $19-$20 Output Name 4 8 (char)
32-40 $21-$28 Output Name 5 8 (char)
41-48 $29-$30 Output Name 6 8 (char)
Send Output names ($8D)
Transmit ADDR header ($FB xx $FB xx,where xx = ADDR) (See Note 9)
Get DT
Get ID
Transmit $X1 $X2 (where $X1 $X2 = number of data bytes to follow including checksum) ($00 $33 = all data)
Transmit $8D (command code)
Transmit the starting Name index (0 = Beginning of the first Name)
Transmit SNPL
Transmit Checksum
Get COMSTAT
Get OPSTAT (00 hex):
Transmit ADDR header ($FB xx FB xx, where xx = ADDR)
Get DT
Get ID
Transmit $00 $02 (where $00 02 = number of data bytes to follow including checksum)
Transmit $00 (command code)
Transmit $FE (Checksum)
Get STATUS (See Notes 6 and 7)
Get Checksum
Get COMSTAT
STATUS consists of 19 bytes returned in this order:
Byte
Parameter Value
1 OPSTAT See OPSTAT return values on Page 4
2 Preset Memory 1 16
3 Working/stored flag 1/0 (See Note 6)
4 Working/dirty flag 1/0 (See Note 7)
5 VU Display 0 7, 0 = Port 1 IN, 1 = Port 2 IN, 2 = Port 3 IN, 3 = Port 4 IN, 4 = Port 5 IN, 5 = Port 6 IN,
6 = Port 1 OUT, 7 = Port 3 OUT
6 VU Level (dB) -45 +9, -45 = -45 dB, ... , 9 = 9 dB**
7 Master Port 0 5, 0 = Port 1, 1 = Port 2, 2 = Port 3, 3 = Port 4, 4 = Port 5, 5 = Port 6
8 Master Mic 0 47, 0 = Mic 1, 1 = Mic 2, etc.
9 Port Sig flag 1/0
10 Mic Sig flag 1/0
11 Prog Sig flag 1/0
12 Near Sig Offset (dB) 1 40 (See Note 8)
13 Prog Sig Threshold (dB) -45 +9, -45 = -45 dB, ... , 9 = 9 dB**
14 Mix 1 Status Bitwise where Bit 0 = Mic 1, Bit 1 = Mic 2, Bit 2 = Mic 3, ... , Bit 7 = Mic 8
15 Mix 2 Status Bitwise where Bit 0 = Mic 1, Bit 1 = Mic 2, Bit 2 = Mic 3, ... , Bit 7 = Mic 8
16 Mix 3 Status Bitwise where Bit 0 = Mic 1, Bit 1 = Mic 2, Bit 2 = Mic 3, ... , Bit 7 = Mic 8
17 Mix 4 Status Bitwise where Bit 0 = Mic 1, Bit 1 = Mic 2, Bit 2 = Mic 3, ... , Bit 7 = Mic 8
18 Mix 5 Status Bitwise where Bit 0 = Mic 1, Bit 1 = Mic 2, Bit 2 = Mic 3, ... , Bit 7 = Mic 8
19 Mix 6 Status Bitwise where Bit 0 = Mic 1, Bit 1 = Mic 2, Bit 2 = Mic 3, ... , Bit 7 = Mic 8
Flash COM LEDs on all units (00 hex):
Transmit $FB $00 $FB $00
Transmit $00 $02 (where $00 02 = number of data bytes to follow including checksum)
Transmit $00 (command code)
Transmit $FE (Checksum)