Wilbur Curtis RSTB with Dual Dilution & Sweetener Option User Manual
Page 6
6
PROGRAM MENUS CONTINUED
P-Maintenance (Factory set to OFF)
Press to select. “P-Maintenance” will appear on the screen when a preset volume is reached. Press < or > to
adjust. Range setting is from Off to 3000 gallons in 100 gallon increments. Press to set and exit.
Beeper On/Off (Factory set to ON)
Press to display ON or OFF. Pressing either < or > toggles between on and off. to set. When ON, this feature
allows you to hear a short beep each time a button is pressed.
Tea Quality Timer (Factory set to OFF)
Press to Select. Press < or > to adjust from OFF, 0 to 10 hours in 5 second increments. Timing starts when a
brew button is pressed. When time expires, the UCM will emit an audio alarm and the words “Brew Fresh Tea” will
appear flashing on the screen.
Display Brew Time (Factory set to ON)
Press to display ON or OFF. Pressing either < or > toggles between on and off. When ON brew time displays and
counts down (during the brew cycle). When OFF, only the word Brewing is displayed during the brew cycle.
Display Messages (Factory set to ON)
Press to display ON or OFF. Pressing either < or > toggles between on and off. This feature allows the operator to
select the message “Rinse Server Before Brewing”. This will be displayed any time the unit is not brewing.
Model Select (Factory set to DUAL SWEET)
Press to select, < or > to select model. The selections are: TCT-1BATCH, TCT-2BATCH, TCT-3BATCH, TCT-
4BATCH, TCT-SWEET, DUAL DILUTION, DUAL -SWEET, COMBO, COMBO-SWEET. Press to set. When the
Model Select feature is changed, all settings are reset to the defaults of the newly selected model.
Exit
Press to select, exits program mode and returns unit to operation.
Beeper On/Off
Exit
Tea Quality Timer
Display Messages
Model Select
P-Maintenance
Displ. Brew Time