16 electrical schematic gem3if, Cleaning – Wilbur Curtis GEM3IF User Manual
Page 16

16
Electrical Schematic
GEM3IF
Regular cleaning of your coffee brewer will maintain the highest quality coffee your equipment is capable of producing. A proper cleaning is
essential in preserving the appearance and performance of the brewer.
CAUTION: DO NOT use undiluted bleach or chlorine.
1. Turn off the unit at the button on the front control panel.
2. Wipe exterior surfaces with a damp cloth, removing spills and debris.
3. Slide the brewcone out and clean it. Thoroughly soap the sprayhead area with a mild detergent solution.
4. Wash the brew basket. Use a soft bristled brush for hard to clean areas. Wash both parts with a detergent solution or put these parts
through a dishwasher.
Liquid Level Probe
Cleaning intervals for the probe are to be determined by the user or the service tech based on water conditions. The
use of water filters, or the type of water filter that is being used can impact the service interval. Intervals can be from
one month to several years, however, replacing rather than cleaning the probe is preferable.
CLEANING