Vertical Communications GCA70-313 - Manual (Page 73)

· To use Tracker to transfer a call to a park orbit for retrieval
and transmit the call’s park orbit code and caller ID
information (if available),
1. ANSWER call AND PRESS
TRNS/CONF.
2. DIAL extension number.
3. PRESS
INTERCOM AND DIAL
*8
IF the called station does
not answer or is busy.
4. HEAR confirmation beep (Tracker page accepted) OR HEAR
busy tone (Tracker page not accepted).
5. PRESS
SPEAKER button to end.
· To retrieve a call that you parked using the Tracker option,
1. PRESS
TAP to retrieve.
· If you receive a parked call message on your Tracker pager,
1. GO to any system station.
2. PRESS
INTERCOM.
3. DIAL Tracker pager orbit code (
#800
to
#899
).
4. RETRIEVE call.
· To enable or disable a Tracker pager at your station,
1. PRESS
INTERCOM.
2. DIAL
#07
to enable, OR DIAL
#06
to disable.
3. PRESS
SPEAKER to end.
Non-LCD Station User’s Guide 65
GCA70-313 Other Advanced Features