Vertical Communications GCA70-313 - Manual (Page 33)

Automatic Dialing
Automatic dialing provides one- or two-button speed dialing using programmable
buttons at which you have previously stored numbers. There are two types of speed
dial numbers: (1) numbers that you store for your own use (personal speed dial
numbers), and (2) numbers that the system attendant stores for everyone’s use
(system speed dial numbers).
NOTE: When you call from a station not equipped with a speaker (for
example, 8112N and 8212N) you must LIFT the handset AND PRESS
TAP before initiating any automatic dialing activity.
· To automatically dial a speed dial number stored at one of
the programmable buttons on your station, choose one of
the following:
1. PRESS programmed speed dial button (line selection is usually a
part of the stored speed dial number).
2. PRESS
SHIFT AND programmed speed dial button (to choose
number stored as second choice at that button).
· To speed dial a personal speed dial number stored at the
dial pad,
1. DIAL speed dial number on dial pad (
0
to
9
).
NOTE: If you are already on a line, you must press
SHIFT before dialing the
personal or system speed dial numbers that are stored at the dial pad. Also,
if a speed dial number’s preselected line is in use, the speed dial will not
engage.
· To speed dial a system speed dial number stored at the dial
pad,
1. DIAL
*
AND system speed dial number.
Non-LCD Station User’s Guide 25
GCA70-313 Making Calls