Vertical Communications GCA70-313 - Manual (Page 70)

Automatic Redial
(8124S, 8112S and 8212S only)
If your station has the multiple automatic redial feature enabled, you can place up to
10 numbers in your telephone’s redial queue.
· To use the automatic redial feature to redial a busy or
unanswered number,
1. While the telephone is idle, DIAL
*70
OR PRESS the
AUTOMATIC REDIAL button programmed by your installer.
2. The system repeatedly dials the number until you cancel the fea-
ture or the system has dialed the number a preprogrammed
number of times (determined by your system installer).
3. The AUTOMATIC REDIAL light flashes between redials and
turns on steady during redialing.
4. IF your installer has enabled answer supervision on your line, the
system automatically cancels automatic redialing and turns the
AUTOMATIC REDIAL light off.
5. IF answer supervision is NOT enabled, PRESS the programmed
AUTOMATIC REDIAL button while on the call to cancel
automatic redialing.
6. IF your system installer has enabled the redial multiple numbers
feature, you can have up to 10 numbers in your redial queue. To
add numbers to your redial queue, REPEAT step 1 in the above
procedure.
In order to utilize the multiple automatic redial queue, you must first program a
AUTOMATIC REDIAL button. The system will automatically redial only the last
number placed into the queue, so you must repeatedly press the programmed button
to access previous numbers in the queue. (For example, pressing the AUTOMATIC
REDIAL button twice with the system idle will redial the second to last number
placed into the queue.) The user must remember all numbers which have been
designated for automatic redial.
· To scroll through numbers in your redial queue if your
telephone is currently idle,
1. PRESS the programmed AUTOMATIC REDIAL button repeat-
edly to select the desired number which has been previously
placed in the redial queue.
62 Non-LCD Station User’s Guide
Other Advanced Features GCA70-313