Vertical Communications GCA70-313 - Manual (Page 65)

Response Message Button
You may program a RESPONSE MESSAGE button, which allows you to send an
LCD message to a caller who has initiated a SOHVA or intercom call from an LCD
speakerphone, or to send an LCD message to an LCD speakerphone that you call
and receive a busy signal or no answer.
· To store a fixed RESPONSE MESSAGE button (delivers the
same message each time it is pressed),
1. PRESS
INTERCOM.
2. DIAL
**6
.
3. PRESS programmable button for RESPONSE MESSAGE button
location.
4. DIAL message number (01-30) from list of messages.
NOTE: The system attendant creates the programmed messages available
for use that are listed in a table on page 49.
5. DIAL
#
to save programming.
6. PRESS
SPEAKER to end.
7. LABEL button location.
Non-LCD Station User’s Guide 57
GCA70-313 Programming