Making intercom calls 24, Dialing intercom numbers (tone-first), 24, Dialing intercom numbers (voice-first), 24 – Vertical Communications GCA70-313 User Manual

Page 32: Making intercom calls

Making Intercom Calls

There are two methods for making intercom calls. One method causes the called
telephone to ring (tone-first). The other method causes your voice to sound out at the
called telephone (voice-first). Your installer can set the system to deliver either
tone-first or voice-first calling.

NOTE:

The following instructions assume a tone-first setting. You can

change a call to voice announce signaling for that call simply by pressing
the

INTERCOM button again after dialing the extension number or by

pressing the

DSS/BLF button again.

To manually cause the other telephone to ring (tone
calling),

1. PRESS

INTERCOM OR LIFT handset if privacy is desired.

(8112N and 8212N users must lift handset.)

2. DIAL extension number (called telephone will ring).

To tone call automatically,

1. PRESS

DSS/BLF button (called telephone will ring). (8112N and

8212N users must lift handset first.)

NOTE:

The following instructions assume a voice-first default setting. You

can change a call to a tone signaling for that call simply by pressing the

INTERCOM button again after dialing the extension number or by pressing

the

DSS/BLF button again.

To voice announce manually,

1. PRESS

INTERCOM.

2. DIAL extension number.

3. SPEAK your announcement.

To voice announce automatically,

1. PRESS

DSS/BLF button.

2. SPEAK your announcement.

Non-LCD Station User’s Guide

Making Calls

GCA70-313