Vertical Communications GCA70-313 - Manual (Page 67)

You can store feature access codes at programmable buttons to provide yourself
with one-button access to features that you use quite often. To find your feature code
of interest, refer to Appendix A on page 73.
· To manually store an access code,
1. PRESS
INTERCOM.
2. DIAL
**3
.
3. PRESS programmable button to choose storage location.
4. DIAL access code for feature.
5. LABEL button location.
6. PRESS next location button and store next feature code.
7. REPEAT previous steps until all desired feature codes are stored.
8. PRESS
SPEAKER to end.
· For example, to program a button to provide group call
pickup (access code #4),
1. PRESS
INTERCOM.
2. DIAL
**3
.
3. PRESS programmable button to choose storage location.
4. DIAL
#4
.
5. LABEL button location.
6. PRESS
SPEAKER to end.
Non-LCD Station User’s Guide 59
GCA70-313 Programming