Vertical Communications GCA70-313 - Manual (Page 58)

Message Waiting Light and Messaging
If the system installer designates your station to have message-wait originate ability,
you can turn on the message-waiting light of any other telephone.
· To turn on the message-waiting light (and a broken dial
tone, if programmed) at another station that is idle or busy,
1. PRESS
INTERCOM.
2. DIAL
*3
.
3. DIAL extension number OR PRESS
DSS/BLF button of station to
be alerted. The message-waiting light of called station will flash.
· To turn off the message waiting light at a busy or idle
station,
1. PRESS
INTERCOM.
2. DIAL
#3
.
3. DIAL extension number OR PRESS
DSS/BLF button of station
that was alerted. The message-waiting light of called station will
turn off.
· To turn off the message-waiting light during
message-delivering conversation,
1. PRESS
INTERCOM once if off-hook, twice if on-hook.
· To receive a message at an alerted station,
1. OBSERVE flashing message waiting light or hear broken dial
tone.
2. PRESS
INTERCOM AND HOLD. The station that left the message
is called automatically.
50 Non-LCD Station User’s Guide
Nonverbal Messaging GCA70-313