Canon P-150M - Manual (Page 73)

73
Hint
• Clicking [Return to main screen] returns to the main screen of
Scan First.
• When [Save to folder] is selected as the output method, you can
click [Open storage folder] to open the folder in which the
scanned images were saved.
Starting Scan First with the Start Button
Scan First is assigned to the Start button of the scanner by default.
If you load the document in the scanner and press the Start button,
CaptureOnTouch starts and Scan First starts. When scanning of the
document is finished, the output method selection screen appears.
You can then output the scanned images using the same procedure
as that described from Step 5 on
72 page .
Select Scan Job
Flow of Operation
Registering and Editing Jobs
In CaptureOnTouch, up to 10 jobs can be registered for use with
Select Scan Job.
1
Click the [Select Scan Job] tab.
The main screen of [Select Scan Job] appears.
A5
A5 B5 A4 LTR
B5 A4 LTR
Start Button
Register jobs
▼
Select a job
▼
Scan a document
▼
Output the scanned images