Canon P-150M - Manual (Page 33)

33
Hint
If the [Enable continuous scanning] check box was selected, the
confirmation screen appears when scanning of the whole
document is completed.
Load the next document, and then click [Continue scanning] to
start scanning the document.
If you have finished scanning all documents, click [Continue to
next step].
6
Set the file name for the scanned images to be saved.
[File name] displays the file name for the scanned images to be
saved. You can use one of the following methods to change the
file name.
• If you clear the [Use file name settings dialog box] check box, the
file name field becomes blank and you can enter any file name.
• If you click [File name settings], you can specify how to assign
the file name.
7
Set the file format for the scanned images to be saved.
You can select the file format from the [File type] drop-down list.
When a file format other than BMP is selected, you can click
[Detail Settings] and set more advanced settings. The following
shows the advanced settings by file format.