Petsafe VT-800 Remote Vibration Trainer - Manual (Page 24)

24 www.petsafe.net www.petsafe.net 25
DE
FR
ES
NL
IT
EN
Battery Disposal
Separate collection of spent batteries is required in many regions;
check the regulations in your area before discarding spent batteries.
The Remote Transmitter operates on one battery of the type Nickel
Metal Hydride (NiMH) with a 4.8 Volt, 300 mAH capacity. The
Receiver Collar operates on one battery of the type lithium with a
3.6 Volt, 300 mAH capacity.
Remote Transmitter: At end of product life, use these battery
removal instructions for final disposal of the battery pack.
• Using a number 1 Phillips screwdriver, remove the case screws.
• Remove the case back or cover.
• Remove the old battery pack.
When removing the old battery pack, care
must be taken when gripping the connector
firmly to avoid damaging the wires.
Shorting the battery wires may cause fire or
explosion. These instructions are not valid
for repair or battery replacement. Replacing
the battery with a battery not specifically
approved by Radio Systems
®
Corporation
may cause fire or explosion. Please contact
the Customer Care Centre to avoid voiding
your warranty. For a listing of Customer Care
Centre telephone numbers, visit our web site
at www.petsafe.net.
Risk of explosion if battery is replaced by
an incorrect type. Dispose of used batteries
according to the instructions.