Panasonic CQDFX555 - Manual (Page 4)

Precautions (ISO connector)_______________
• Wiring for the power connector conforms to the arrangement of standard ISO connectors.
• in case of some car types, the arrangement of connector may differ from the standard ISO as
shown in Table 1, even though ISO connectors are adapted.
Table 1
—------- ------------- .__,____^igT^Pin^. A4 A7
Car for Standard ISO
Battery
(permanent 12 V supply)
“IGN”or“ACC”
(switched 12 V supply)
In case of Car type A
“ION” or “ACC”
(switched 12V supply)
Battery
(permanent 12 V supply)
In case of Car type B No Connection
Battery
(permanent 12 V supply)
Make sure the ISO connector arrangement In your car side is as same as the standard ISO.
(Table 1, Fig. 1)
In case of arrangement for Car type A or B, change connections of the red/yellow leads at the
re-connectable joint (^*) as shown in Fig.1.
Fig.1
standard ISO
ACC l>
Red ^ Red ^
A7
Car A
Car B
BATTERY 15A :i ____^
Yellow ^ Yellow\
TOT
A4
= BATTERY ISA =[
Yellow
Red
ACC
m
= BATTERY15A i
Red ^ Yellow
Yellow ^ Red
ACC l=Cl 13= uz^
Red Yellow
2^
-A7: ACC/IGN Switch
+12V
—A4 : +12V Battery
-A7 ;+12V Battery
-A4 : ACC/IGN Switch
+12V
-A7 : +12V Battery
^A4: NC
• After fix the connections, the part {^) should be insulated with electrical tape to keep away
from unit damage.