Cabletron Systems 2000 User Manual
Page 69
Managing the Hub
2-47
The SmartSwitch 2000 Chassis View
UPS ID
Displays the manufacturer and model typecode of the UPS attached to the COM
port of the SmartSwitch 2000. You must assign this typecode for the UPS window
to be active. (See
, for instructions for setting the
typecode for your UPS.) The valid typecodes are:
¥
Model 370
¥
Model 400
¥
Model 600
¥
Model 900
¥
Model 1250
¥
Model 2000
¥
Matrix 3000
¥
Matrix 5000
¥
SU 700
¥
SU 1400
¥
SU 2000XL
¥
Other
UPS Uptime
Displays the number of hours that the UPS has been operating since the last time
it was started up.
Line Voltage
Displays the voltage coming through the line attached to the SmartSwitch 2000.
Battery Output
Displays the amount of battery output voltage.
Battery Capacity
Displays the percentage of remaining battery capacity (100% indicates a fully
charged battery).
Test Results
Displays the result of the last self-test performed by the UPS. The possible test
results are:
Unit OK
The UPS unit is in working order.
Unit Failed
The UPS unit has failed the self-test. Check the
unit for damage or consult your UPS UserÕs
Manual.
Bad Battery
The UPS unit battery is bad.
No recent test
No UPS self-test has been performed in the last
Þve minutes.
Unit in test...
The UPS is currently in test mode.
Please standby