Cabletron Systems 2000 - Manual (Page 17)

Software Conventions 1-9
Introduction
Figure 1-2. Sample Window Showing Group Boxes
Device Name
Displays the user-deÞned name of the device. The device name can be changed
via the System Group window; see the Generic SNMP UserÕs Guide for details.
IP Address
Displays the deviceÕs IP (Internet Protocol) Address; this will be the IP address
used to deÞne the device icon. IP addresses are assigned via Local Management
for the SmartSwitch 2000; they cannot be changed via SPECTRUM Element
Manager.
Location
Displays the user-deÞned location of the device. The location is entered through
the System Group window; see the Generic SNMP UserÕs Guide for details.
MAC Address
Displays the manufacturer-set MAC address of the interface SPECTRUM Element
Manager is communicating through. This address is factory-set and cannot be
altered.
IP Address
MAC
Address
Device
Name
Location