Cabletron Systems 2000 - Manual (Page 27)

Viewing Chassis Information 2-5
The SmartSwitch 2000 Chassis View
Figure 2-2. SmartSwitch 2000 Chassis View Menu Structure
The Device Menu
From the Device Menu at the Chassis View window menu bar, you can access the
following selections:
¥ Device Type displays a window containing a description of the device being
modeled. See Viewing Hardware Types , on page 2-18 .
Note that for the Device menu:
• The FDDI Statistics option will
appear if you have an HSIM-F6
module installed.
• The ATM Connections option will
appear if you have an HSIM-A6DP
module installed.
• The VLAN option will appear if your
device has been configured to operate
in 802.1Q mode.
• The Priority Configuration option
will appear if your device supports
802.1P Dynamic Multicast
Filtering/Priority Queuing.
• The UPS option will only appear if
your COM port has been configured
for use with an Uninterruptable Power
Supply.
Note also that no bridge-related options
will appear in any menu if the device is
running in SecureFast Switching mode.