Cabletron Systems 2000 User Manual
Page 29
Viewing Chassis Information
2-7
The SmartSwitch 2000 Chassis View
¥
Broadcast Suppression
allows you to set a threshold on the number of
broadcast packets issued from each port on the SmartSwitch 2000 when it is
operating in traditional switch (bridge) mode. See
¥
FDDI Statistics
menu option will appear if you have an HSIM-F6 installed in
your device. This launches a window which displays trafÞc-related statistics
for each Station Management (SMT) entity present on an installed HSIM-F6.
See Chapter 6,
, for more information.
¥
UPS
, which brings up a window that allows you to conÞgure an
Uninterruptable Power Supply attached to your SmartSwitch 2000; see
an Uninterruptable Power Supply (UPS)
, for details.
¥
Bridge Status
opens a window that provides an overview of bridging
information for each port, and allows you to access all other bridge-related
options. Refer to the Bridging chapter in the SPECTRUM Element Manager
Tools Guide
for more information.
¥
Find Source Address
opens a window that allows you to search the 802.1d
Filtering Database of the SmartSwitch 2000 to determine which bridging
interface a speciÞed source MAC address is communicating through. If the
MAC address is found, the port display will ßash to indicate the correct bridge
interface. Refer to
Using Find Source Address Functions
more information.
¥
Exit
closes the SmartSwitch 2000 Chassis View window.
The View Menu
The View menu lets you switch the front panel display between two graphical
representations of the device:
¥
The Logical view provides the logical front panel display of the SmartSwitch
2000 device and its interfaces.
NOTE
The UPS menu option will only be available when the COM Port is administratively set
to UPS in the COM Port ConÞguration window.
NOTE
If an HSIM-A6DP is installed in your SmartSwitch 2000, ATM Connections will be
available as an additional Device menu selection. The ATM Connections window is
described in Chapter 7,