Cabletron Systems 2000 - Manual (Page 188)

HSIM-W87 Configuration
8-6 Configuring IP Priority
Configuring IP Priority
The IP Priority ConÞguration window allows you to assign priority transmission
to up to 16 IP addresses communicating across the HSIM-W87. To access the IP
Priority ConÞg window:
1. Click on the appropriate Module Index to access the Module menu.
2. Select IP Priority Config. The IP Priority Config window, Figure 8-3 , will
appear.
Figure 8-3. The IP Priority ConÞg Window
In the IP Priority ConÞg window there several Þelds and a list box displaying the
current IP addresses that have been conÞgured for priority transmission.
The following information is provided in the window:
Max Entries
This is a read-only Þeld that displays the maximum number (16) of Priority IP
addresses that can be conÞgured.