Xpres 3D SMARTone - Manual (Page 23)

3D SMARTone INSTALLATION AND OPERATION
23
By clicking the button at the bottom
the orientation is corrected.
NB you can also rotate the orientation
in Photoshop and keep the print
setting constant.
Press Print button in Photoshop.
Press the Print button in Photoshop
The print dialogue box will open.
Confirm that the Epson WP‐4015 is
the target printer.
If necessary check the preferences are
set correctly.
The number of copies can also be set
here.
Load a sheet of film in to the printer