Workrite Sierra HXL Assembly Instructions for 3-Leg Front-Crank Workcenters - Manual (Page 6)

6 of 10 Workrite Ergonomics | 800.959.9675 www.workriteergo.com
Workrite Sierra HXL™ 3-Leg Crank Workcenters - Assembly Instructions
Left Leg
Right Leg
Attach Outside Legs to Hex Shafts and Crank Tube
With Leg Assemblies upside down and aligned to worksurface...
Right Leg: Insert short end of Deep Hex Shaft (G) into Right Leg. Slide Crank Tube (T) over Deep
Hex Shaft.
Left Leg: Insert short end of Shallow Hex Shaft (F) into Left Leg. Slide Crank Tube (T) over Shallow
Hex Shaft.
Right Leg Left Leg
G
F
Attach Center Legs to Worksurface
Attach top plate of Center Leg to desk using Pan Head Screws
(M) provided. Use the locating holes. If you use an electric
screwdriver, be sure it is on the lowest torque setting to avoid
stripping the threads.
T
T
If you have a Silhouette ½"
top, be sure to use #10 - 24
× ½” Pan Head Self-Tapping
Screws or you will damage
your top!
!
M
a
6
a
b
7
b
a
a