Workrite Sierra HXL Assembly Instructions for 3-Leg Front-Crank Workcenters - Manual (Page 10)

10 of 10 Workrite Ergonomics | 800.959.9675 www.workriteergo.com
Workrite Sierra HXL™ 3-Leg Crank Workcenters - Assembly Instructions
Tighten All Screws and Flip Table Over
Tighten all Screws in frame assembly.
Tighten all Wood Screws connecting handle and frame assembly to worksurface.
Flip table over and adjust Leveling Glides if required so that table is steady and does not rock.
13
a
Cleaning instructions
To clean the Sierra HXL legs, apply cleaner to a soft cloth.
Suggested cleaners:
Windex, Formula 409
—Do NOT use solvents
—Do NOT saturate or spray cleaners directly to table base
b
c