Welch Allyn Acuitylink Clinician Notifier, SW Install Instruction, Aculink Clin Not 1.4X - Installation Guide - Manual (Page 15)

5
11
Initialize the Clinician Notifier
program on the mobile device
You will perform the following tasks in this chapter:
• Establish the server IP address and connect to the web service.
• Download and install the Clinician Notifier program.
• Start the Clinician Notifier program.
Establish the server IP address and connect to the web
service
To establish the server IP address
1. In the upper left corner of the mobile device, tap .
2. Tap Clinician Notifier.
The AcuityLink Clinician Notifier Server IP address page appears.
3. Tap in your facility’s IP address for the hospital-side of the WACS server.
Note
I To avoid download retry attempts by the WACS server, do not download Clinician
Notifier software on more than five mobile devices at one time.