Welch Allyn 767 Mobile Aneroid Stand Conversion Kit (With Or Without Weight) 95P348 - Installation Guide User Manual
767 mobile aneroid stand conversion kit, For 767 aneroid wall units
For 767 Aneroid Wall Units:
Tools Required:
Phillips Screwdriver
5/16 open / box wrench
5/8 open / box wrench
1.
Remove wall mounted aneroid from wall and disassem-
ble basket.
2.
Assemble new bracket to aneroid - use self tapping
screw on top hole as shown. Use screw, bushing, and
nut in bottom hole as shown.
3.
Insert bearing and bushing into bracket.
4.
Assemble aneroid and bracket to basket. Use (3) 3/8 inch
long screws and nuts provided.
5.
To complete the mobile stand assembly, refer to the
new instruction booklet provided.
95P348 Rev. B
CASE SCREW
9P2597
ACRON NUT
32P764
FLAT WASHER
22P1440
BASKET
96P134
BASKET SCREW
9P2827
NUT 32P795
BUSHING
8P953
POST
59P584
BRACKET SCREW
9P2455
BUSHING 8P1064
NUT 32P795
BEARING
64P515
767 Mobile Aneroid Stand
Conversion Kit
(with or without weight)
For 767 Aneroid Wall Units:
Tools Required:
Phillips Screwdriver
5/16 open / box wrench
5/8 open / box wrench
1.
Remove wall mounted aneroid from wall and disassem-
ble basket.
2.
Assemble new bracket to aneroid - use self tapping
screw on top hole as shown. Use screw, bushing, and
nut in bottom hole as shown.
3.
Insert bearing and bushing into bracket.
4.
Assemble aneroid and bracket to basket. Use (3) 3/8 inch
long screws and nuts provided.
5.
To complete the mobile stand assembly, refer to the
new instruction booklet provided.
95P348 Rev. B
CASE SCREW
9P2597
ACRON NUT
32P764
FLAT WASHER
22P1440
BASKET
96P134
BASKET SCREW
9P2827
NUT 32P795
BUSHING
8P953
POST
59P584
BRACKET SCREW
9P2455
BUSHING 8P1064
NUT 32P795
BEARING
64P515
767 Mobile Aneroid Stand
Conversion Kit
(with or without weight)
Document Outline
- For 767 Aneroid Wall Units:
- 767 Mobile Aneroid Stand
- Conversion Kit
- (with or without weight)
- 1. Remove wall mounted aneroid from wall and disassemble basket.
- 2. Assemble new bracket to aneroid - use self tapping screw on top hole as shown. Use screw, bushing, and nut in bottom hole as shown.
- 3. Insert bearing and bushing into bracket.
- 4. Assemble aneroid and bracket to basket. Use (3) 3/8 inch long screws and nuts provided.
- 5. To complete the mobile stand assembly, refer to the new instruction booklet provided.
- For 767 Mobile Aneroid Units - to add Weight Option:
- For 767 Aneroid Wall Units:
- (with or without weight)
- 767 Mobile Aneroid Stand
- Conversion Kit
- (with or without weight)
- 1. Remove wall mounted aneroid from wall and disassemble basket.
- 2. Assemble new bracket to aneroid - use self tapping screw on top hole as shown. Use screw, bushing, and nut in bottom hole as shown.
- 3. Insert bearing and bushing into bracket.
- 4. Assemble aneroid and bracket to basket. Use (3) 3/8 inch long screws and nuts provided.
- 5. To complete the mobile stand assembly, refer to the new instruction booklet provided.
- For 767 Mobile Aneroid Units - to add Weight Option:
- (with or without weight)