Welch Allyn CP150 12-Lead Resting Electrocardiograph, Software Version 2.00.XX - Quick Reference Guide - Manual (Page 11)

11. After the test prints, select the desired option: Reprint, Save, Retest, or Rhythm. If
the Auto Save setting is turned off, touch Save to save the test. Select one of the
following locations:
•
Local (internal memory)
• USB mass storage device (Any tests that you save to a USB mass storage
device can be retrieved only from a CardioPerfect workstation.)
• Workstation
• Remote file location
12. Touch Reprint to print the test again, touch Retest to discard the test and start over,
or touch Exit.
WARNING To avoid the risk of associating reports with the
wrong patients, make sure that each test identifies the
patient. If any report does not identify the patient, write the
patient identification information on the report immediately
following the ECG test.
Quick reference guide Performing an Auto ECG test 9