Welch Allyn Propaq LT Monitor Radio Configuration - Quick Reference Guide - Manual (Page 7)

Radio configuration guide 80018988 Ver A 7
8. Click EAP Settings from the options on the left. The EAP Settings screen appears.
9. Select the EAP type you want to use, enter an identity and a password, and click
Apply.
10. If you are using a network with a pre-shared key (PSK), do the following:
a. Click WPA2PSK from the options on the left. The WPA2PSK screen appears.
b. Enter your WPA2PSK key or passphrase and choose your format.
c. Click Apply.
11. Restart the monitor.
Set an SSID using the radio configuration tool
The radio configuration tool interface allows for SSID customization.
To set an SSID through the radio configuration tool user interface
1. Log on to the radio configuration tool.
2. Click SSID and radio band from the options on the left. The SSID and radio band
screen appears.
3. Enter your new SSID name in the SSID box and click Apply.
4. Restart the monitor.