Welch Allyn Propaq LT Monitor Radio Configuration - Quick Reference Guide - Manual (Page 5)

Radio configuration guide 80018988 Ver A 5
Radio configuration tool user interface
The radio configuration tool user interface is for users who do not want to configure their
monitors through the monitor user interface. The tool allows for additional network setting
customization that can not be configured through the monitor user interface.
This interface is largely self-explanatory to anyone qualified to use it. This procedure
covers only the fields that might raise questions.
To configure a monitor through the radio configuration tool user interface
1. Navigate to the Service menu of your monitor as described.
2. Read the IP address from the monitor.
3. Enter the monitor IP address as a URL in your Web browser. A logon screen appears.
4. Log on to the radio configuration tool.
a. User name: admin
b. Password: webpassword1234.
If you want to change your password, do the following:
a. Click Web admin password from the options on the left.
b. Enter a new password in the Enter new password field.
c. Enter the same password in the Confirm new password field.
d. Click Apply.
Make sure you write down your new password. If the new password is lost or
forgotten, it can not be recovered.
5. Click Authentication and Encryption from the options on the left. The
Authentication and encryption screen appears.
Note Accessing the radio configuration tool requires your monitor to be connected to a
network.