Vintage Cellars 4200VSI 220V CellarPro - Manual (Page 18)

18
 Basic Operation
The temperature inside the cellar can be increased or decreased by changing the
Minimum Set Point as described later in this chapter. If the cooling unit runs too
much, you can raise the Minimum Set Point to reduce the cycle “on” time. Most wine
collectors store their wine in the range of 12.8 – 15.6°C.
CellarPro cooling units are designed to maintain appropriate levels of humidity,
ranging from 50 to 70 percent, inside wine cellars. In order to increase or decrease
humidity inside the cellar, the Fon setting can be changed as described in the
“Advanced Operation” section later in this chapter.
 Switch Instructions