Rf chan chan 01 b_light, Chapter 28: lcd back light ( b_light ) – Torbal BAS Series User Manual
Page 53
- 52 -
In order to use the Crane Scale with the remote control, both the BAS Crane Scale as well as the remote
control must be set to the same RF Channel. To set or change an RF Channel follow the steps below:
1. Press the MENU key, when the option “RF Chan” is displayed press the T Key.
2. The scale will display available channels. To set a desired channel presses the T Key.
…
Function Options:
B_L OFF (B_L OFF)
Disables LCD back light.
B_L On (B_L On)
Enables LCD back light.
B_L ECO
(B_L ECO)
Disables the LCD back light after 30 second inactivity “no weight applied to the
pan or the pressed keys.”
B_L BAT
(B_L BAT)
Disables back light after 30 second inactivity when operating the unit on batteries
“no weight applied to the pan or the pressed keys.”
To configure or disable the LCD back light follow the steps below:
1. Press the MENU key, when the option “B_Light” is displayed, press the T Key.
2. The scale will display available back light settings: “B_L On”, B_L Off, “B_L ECO” and “B_L BAT”.
3. To make a selection press the T key when desired back light setting is displayed.
Chapter 28: LCD Back Light (b_LIGHT)
Chapter 27: RF Channel Setup for Remote Control (rf chan)
rf CHan
CHan 01
b_LIgHT
b_L on
B_L oFF
b_L ECO
b_L BAt