Torbal BAS Series - Manual (Page 23)

- 22 -
6. A dashed line will be displayed indicating to manually enter the exact individual piece weight of the
counted parts. To manually enter the individual piece weight, use the following keys: the C key to
increment a digit, the T key to accept and go to the next digit, the
key to insert a decimal, and the
MENU key to accept the entire setting.
To increment a digit To accept and go to
next digit
To insert a decimal To accept entered
value
7. Once the individual piece weight is entered and the MENU key pressed, the scale will display “0pcs”. At
any time proceed with the count.
8. Once an accurate count has been taken, the contents may be removed from the scale. To exit parts
counting and return to basic weighing, select “PCS OFF” from the parts counting menu.
.
10.00
5
PCS