Torbal BAS Series - Manual (Page 36)

- 35 -
17.3 Bites
1. Press the MENU key, when the option “Port - 1” is displayed press the T key, and then select the option
“Bites” by press the T key once again.
2. The scale will display available Bits settings: “7-bit”,”8-bit”. To make a selection press the T key when
the desired setting is displayed.
17.4 Parity
1. Press the MENU key, when the option “Port - 1” is displayed press the T key, and then select the option
“Parity” by press the T key once again.
2. The scale will display available Parity settings: “none”,”odd”, “even”. To make a selection press the T key
when the desired setting is displayed.
rs -1 bItS
rs -1 PARITY
7 - bIt 8 - bIt
none odd evEN