Torbal BAS Series - Manual (Page 14)

- 13 -
1. To begin weighing, press the power button ( ) to turn the scale ON. The scale will go through its
initialization procedure and automatically enter “Weighing Mode”. The scale is ready to begin
weighing as soon as the stabilization (
) and zero (Ж0Е) indicators appears on the display.
2. When weighing, always hang each load on the scale’s hook with caution and make sure it is safety
secured. The weighed result may be taken when the stabilization indicator appears on the display.
10.1 Taring
1. If a hanging pan is used for weighing, it may be tared. In taring the pan, the scale subtracts the weight
of the pan from the gross weight to obtain the net weight.
2. To tare the hanging pan, hang it on the hook. The pan’s weight will be shown on the display.
Chapter 10: Weighing
0.00
12.00
2.04