Changing the image quality, P. 97), Choose the image quality – Canon IXUS 120 IS User Manual
Page 97: Choose an option, Image quality table estimated shooting time

97
You can choose between three image quality settings.
Choose the image quality.
●
Press the
m button, then use the op
buttons to choose
, then press the
m
button again.
Choose an option.
●
Press the
op buttons to choose an
option, and press the
m button.
X
The setting will display on the screen.
Image Quality Table
Estimated Shooting Time
Changing the Image Quality
Image Quality
(Recording Pixels/Frame Rate)
Content
1280 x 720 pixels, 30 frames/sec. For shooting high-definition movies.
640 x 480 pixels, 30 frames/sec.
For shooting standard quality movies.
320 x 240 pixels, 30 frames/sec.
Since the number of recording pixels is smaller,
the image quality will be lower than with
,
but you can record three times the length.
Image Quality
(Frame Rate)
Shooting Time
2 GB
8 GB
10 min. 53 sec.
43 min. 32 sec.
23 min. 49 sec.
1 hr. 35 min. 11 sec.
1 hr. 13 min. 10 sec.
4 hrs. 52 min. 24 sec.
•
Based on Canon’s testing standards.
•
Maximum clip length is approximately 10 minutes in
, 1 hour in
and
.
Recording also stops when the file size reaches 4 GB.
•
Recording may stop even if the maximum clip length has not been reached on some
memory cards. SD Speed Class 4 or higher memory cards are recommended.