Changing shooting functions, P. 136), Red-eye – Canon IXUS 120 IS User Manual
Page 136: Turning off the af assist beam, Turning off the red-eye reduction function
136
If you set the mode switch to
4, and the mode to G, you can change the
settings in the
4 tab
Turning off the AF Assist Beam
The lamp will automatically light to assist focusing in low light conditions
when you press the shutter button halfway. You can turn off the lamp.
●
Choose [AF-assist Beam], then press the
qr buttons to choose [Off].
Turning off the Red-Eye Reduction Function
The red-eye reduction lamp lights in order to reduce the red-eye effect that
occurs when shooting in dark conditions with the flash. You can turn off this
function.
●
Choose [Flash Settings], then press the
m
button.
●
Press the
op buttons to choose [Red-Eye
Lamp], then press the
qr buttons to choose
[Off].
Before attempting to shoot using a function explained in this chapter in
modes other than
G mode, check if the function is available in those
modes
Changing Shooting Functions