Vertical Communications 8012S - Manual (Page 93)

iPrimo Speakerphone Station User’s Guide
October, 02 Comdial 83
6.6 Response Message Button
You may program a RESPONSE MESSAGE button, which allows
you to send an LCD message to a caller who has initiated a SOHVA
or intercom call from another LCD speakerphone, or to send an LCD
message to another LCD speakerphone that you call and receive a
busy signal or no answer.
• To store a fixed RESPONSE MESSAGE button (delivers the
same message each time it is pressed),
1. Select OPTIONS.
2. Select Programming.
3. Select NEXT until the Feature Button option appears.
4. Select Feature Button.
5. Select the programmable button you wish to use as a
response message button.
6. Select NEXT until the Response Message option appears.
7. Select Response Message.
8. Select from the list of displayed messages. Select NEXT to
scroll through the list of messages. If you use the Back at or
Call options add to them as follows:
• For Back at message, dial the code for the time numbers
and colon from dialing codes table.
For example, dial #0001290405 for time 01:45.
• For the Call message, dial the code for telephone number
where you can be reached.
For example, dial #090708150202
0000 for number 978-2200).
9. Repeat steps 5 through 8 for other features, or select EXIT
to end programming.