Vertical Communications 8012S - Manual (Page 14)

Getting Started
4 Comdial October, 02
Also remember, as with any piece of electronic equipment, your tele-
phone may be damaged by contact with liquids. Please try to place
the telephone in an area that is free from the danger of spills.
1.3 Using Your Speakerphone
• To manually place a call using your speakerphone,
1. Press Intercom or Line button.
2. Dial the number.
3. When party answers, speak toward the telephone.
• To automatically dial a number using your speakerphone,
—Press the pre programmed speed dial or DSS/BLF button and
speak toward the telephone when your party answers.
• To answer a call with your speakerphone,
1. Press the Intercom or line button with flashing red or orange
light.
2. Speak toward the telephone to answer the call.
3. Press the Speaker button to end.
1.4 Setting Display Contrast
You can darken or lighten the contrast of the display for best
viewing.
• To adjust the display contrast,
1. Select Options.
2. Select Programming.
3. Select Contrast Level.
NOTE: For more tips and information on speakerphone oper-
ation including the use of a Full-Duplex Speakerphone, see
Appendix D, Speakerphone Characteristic on page.131