Vertical Communications 8012S - Manual (Page 92)

Programming
82 Comdial October, 02
When an alert sounds at the set time, you hear four short tone bursts,
which will continue until acted upon. If you are not at your station to
hear the alert when it sounds, your telephone’s ring tone changes to
the alert tone for every incoming call until you respond to the alert.
Figure 6-9 Respond to an Alert
• To respond to an alert after it sounds, choose one of the
following:
1. Select CLEAR to turn off the alert.
2. Select SET to reset the alert for the same time the following
day.
Wednesday 19 11:36am
Alert 1 04:00 AM CLEAR
VMAIL OPTIONS