Vertical Communications 8012S - Manual (Page 44)

Making Calls
34 Comdial October, 02
• To voice announce manually,
1. Press INTERCOM.
2. Dial the extension number.
3. Speak your announcement.
• To voice announce automatically,
1. Press the DSS/BLF button.
2. Speak your announcement.
3.3 Automatic Dialing
This feature provides one- or two-button speed dialing using pro-
grammable buttons at which you have previously stored numbers.
Two levels of number storage are available at each storage location,
and you can use one or both levels as needed. Further, since you
usually store a line choice as part of a speed dial number, line
selection is automatic with speed dialing.
There are two types of speed dial numbers: (1) numbers that you store
for your own use (personal speed dial numbers), and (2) numbers that
the system attendant stores for everyone’s use (system speed dial
numbers).
• To automatically dial a number stored at one of the
programmable buttons on your station, choose one of the
following:
—Press the programmed speed dial button, or press SHIFT and
the programmed speed dial button.
Note: The following instructions assume a voice-first default
setting. Any user can change a call to a tone signaling for that
call simply by pressing the INTERCOM button again after
dialing the extension number or by pressing the DSS/BLF but-
ton again.