Vertical Communications 8012S - Manual (Page 22)

Getting Started
12 Comdial October, 02
1.10 Your Speakerphone’s Display
Lights
The lights (LEDs) on your LCD speakerphone indicate the status
of lines, features, and intercoms.
Busy Lamp Field (BLF) lights (next to a Direct Station Select/
Busy Lamp Field or DSS/BLF programmable button):
• Steady red = station is in use.
• Flashing red = station is receiving a call.
• Winking/Fluttering red = message-waiting light set for you
by station associated with that DSS/BLF button.
Next to a line button:
• Steady green = this is your line, either on-hook (in a hands
free mode) or off-hook, when the line is active.
• Steady red = another station is using this line.
• Flashing red = a call is coming in on this line.
• Flashing orange = this line will be answered when you lift the
handset.
• Winking green = your line is on hold.
• Winking red = the call has been placed on hold by another
station.
• Fluttering orange or green = your line has recalled from hold.
• Fluttering red = the line put on hold by another station has
recalled.
Note: You can find the programmable buttons that the installer
designates line buttons in the same location as the DSS/BLF
buttons. Ensure that these buttons are labeled correctly to
indicate their unique features.