Rice Lake TP Series, Rice Lake Weighing Systems - Software Development Kit - Manual (Page 10)

6 TP Series
2.2.1 Interface Section
Displayed when  is set to  or 
* Denotes a factory-setting
** The data interval in continuous output mode is 0.1 to 1 second (the interval varies
depending on weighing conditions and other factors).
Item Set Value Description
Output
Control
 
Stop output.

Output continuous at all times.

Output continuous if stable (stops output if unstable).

Outputs once by pressing Memory (irrespective of
whether stable).

Outputs once, if stable. Outputs if the balance is stable
when a sample is loaded after the preceding sample has
been removed and the balance indicated zero, or less.

Outputs once if stable, and stops output when unstable.

Outputs once if stable, and outputs continuously when
unstable. Even if the sample is not replaced, output of the
balance stops when it stabilizes after being output once.
*
Pressing Memory key causes the balance to output
once when stable.
Baud Rate

* 
1200 bps

2400 bps

4800 bps

9600 bps
Parity

*  None Displayed only when [7. I.F. 2.]
(7-digit numeric format) is specified.
 Odd
 Even