Rice Lake TC Series, Rice Lake Weighing Systems - Operation Manual - Manual (Page 19)

14 RL-TC Series Operation Manual
5. Switching Function for Units of Measurement
Pressing the Function key allows the user to switch the unit of measurement to [g], [ct], [%], and so on. During setup,
a maximum of five different units can be registered for use in function setup mode.
5.1 Switching Units of Measurement
Switching the units of measurement to be displayed Press the Function key.
Each press advances through the units
of measurement to be displayed.
※The balance is shipped from the
factory with the following default setup:
[g]
→ [ct] → [Pcs] → [%] → [g]
→ · · ·
5.2 Setup of Units of Measurement
When values [
81
.
5
.
u
.] to [
85.5.u.] are entered prior to use, the desired unit of measurement to be displayed can be
chosen simply by pressing the Function key. For more information on the units of measurement that can be set here,
please refer to “4.2 Description of Functions” on page 13.
Example: To change the default factory settings to pound units, use [
82
.
5
.
u
.] in the factory settings.
1 Display the function item [
82.5.u. 14]
Press and hold down the Function key.
Release the key as [
Func] appears on
the display. The function setup mode is
now activated and the first item is
displayed. Press the Function key
several more times until [
82.s.u.14]
appears.]
2 Setting the unit to a pound Press the Zero/Tare key several times
to specify [
82. S.u. 16
].