Rice Lake Prove Statistical Printer - Manual (Page 14)

10 Prove Statistical Printer
5.2 Status LEDs
The following table shows the status LEDs and their conditions.
5.3 Paper Out
The printer will automatically detect when the printer paper has run out, and report
this using the status LED. Replace the paper roll described in Section 5.6.
5.4 Head Thermal Limit
After extensive printing the print head temperature may rise to an unusable level. The
status LED will report when this occurs, and printing will stop until the head
temperature returns to normal levels.
LED indication Condition Solution
On Printer on NA
Off Printer off or asleep NA
Short Flash Every Second Fast charging MCP7810-349 only
* * * Paper out Fit new paper into printer
** ** ** Thermal head too hot Allow head to cool
*** *** *** Battery cutout (no charge
remaining) Recharge batteries -
MCP7810-349
*** *** *** Battery low (approximately
20% of charge remaining)
Table 5-1. LED Status Lights