Rice Lake Prove Statistical Printer - Manual (Page 10)

6 Prove Statistical Printer
3.1 Set Print Mode
There are two ways to set up the print mode on the Prove statistical printer.
• Print everything on a label
• Scales and balance mode
Scales and Balance Mode (Statistical)
1. Power on the printer
2. Press and hold the
CONFIG button until the LED on the unit flashes.
3. Release the CONFIG button and press 10 times.
4. After five seconds, the LED will flash 10 times.
5. Press the
CONFIG button.
6. After five seconds the LED will flash twice and reset.
Tape Printer Mode (Non-Statistical)
1. Power on the printer
2. Press and hold the
CONFIG button until the LED on the unit flashes.
3. Release the CONFIG button and press 10 times.
4. After five seconds, the LED will flash 10 times.
5. Press the
CONFIG button twice.
6. After five seconds the LED will flash twice and reset.
6 Print Density Lowest 1
2
3
4
7 Printer Current Highest 1
2
3
4
8 Print Format Standard paper, normal printing
Standard paper, upside down
printing
Labels, normal printing
Labels, upside down printing 1
2
3
4
9 Sleep/Wake-up Never sleep
Sleep after one minute
Sleep after two minutes
Sleep after five minutes
Sleep after ten minutes
Off, one minute
Off, two minutes
Off, five minutes
Off, ten minutes 1
2
3
4
5
6
7
8
9
Option
Numbers Description Settings
Setting
Number
Table 3-1. Configuration Options