Rice Lake MSI-8000HD Remote Display - Manual (Page 21)

Set Up 17
4.2 Function Keys
The MSI-8000HD has 2 user definable function keys (F1 and F2) on the Front Panel
that can be programmed. F1 is defaulted to Peak Hold and F2 is defaulted to Test.
F3 is currently fixed to the Print function. For operational details of each function,
refer to the Section 3.0.
Function keys on the MSI-8000HD are independent of any Function Key setup on the
Scale/Dyna-Link.
)YQF
SCROLL
SCROLL
SCROLL
SCROLL
SCROLL
ENTER/SELECT
ENTER/SELECT
WRWD/
blinking
QHW*U
blinking
3+OG
blinking
2II
blinking
2II
blinking
1) With the MSI-8000 on, press the
F2 key and the POWER key
simultaneously.
2) The first item of the Setup Menu
is “Func1”.
To setup F2 instead of F1, scroll to the
next menu item by pressing
F2 .
3) To setup the F1 key press F1 .
The current F1 key function is
displayed.
4) Select the F1 key function by
scrolling through the choices with
the
F2 key. See the list of
available functions on the Setup
Menu Map.
This procedure scrolls through all
available choices for illustration
purposes only.
In this example, we’ll set F1 to the TEST
function.
5) When the desired F1 Key
function is displayed, press F1 .
The next item in the Setup Menu
appears.
6) Either press ZERO to exit Setup
and store all changes, or
continue to another Setup Menu
item using the
F2 Key.
Function Key Setup
)YQF
Next Setup Menu Item
Store and return to
weight display 6WRUH
SCROLL
SCROLL
SCROLL
SCROLL
SCROLL
SCROLL
7HVW
blinking
6FDQ
blinking
XQLW
blinking
WDUH
blinking
YWWO
blinking
EXIT/SAVE
ZERO
0
Press Simultaneously
SCROLL
XQLW
blinking
SCROLL
+LUHV
blinking
3ULQW
blinking
WWOUG
blinking
SCROLL
SCROLL
WHVW
blinking
0
F1
F2
Exit and Cancel Changes
Exit and Save/Back 1 Level
Enter / Select
Scroll
In Menu Key Functions
Figure 4-2. Function Keys