Rice Lake Mechanical Chair Scale (RL-MCS) - Manual (Page 6)

2 Mechanical Chair Scale Installation and Operation Instructions
2.0 Installation Instructions
You will receive your Mechanical Chair Scale partially assembled. Those items that need additional assembly
are:
• Pillar and beam assembly to scale base
• Steelyard rod connection
• Transport handle onto scale base
• Seat and footrest installation
• Arm rest installation
Remove all components from the shipping crate and lay out in a convenient place.
2.1 Pillar and Beam Installation
The pillar and beam comes separate from the scale base and must be attached prior to use.
Figure 2-1. Pillar and Beam Components
Use the following steps to attach the pillar and beam to the scale base.
1. Have the scale sitting on the floor in an area that allows you to work freely.
2. Lock casters on the frame to eliminate the unit from rolling while assembling the scale.
Figure 2-2. Lock Casters to Keep From Rolling
Beam
Pillar
Push down on latching
a s s e m b l y t o l o c k
whe els and prevent
scale from rolling.