Rice Lake GX Series, A&D Weighing - Manual (Page 16)

14
5 Press the PRINT key to store the units or modes. The balance displays end and then
displays the next menu of the function table.
6 Press the CAL key to exit the function table. Then the balance returns to the weighing mode
with the selected unit.
7 To select other unit or mode for weighing, press the MODE key.
5. WEIGHING
5-1 Basic Operation (Gram Mode)
1 Place a container on the weighing pan, if necessary.
Press the RE-ZERO key to cancel the weight (tare). The
balance displays 0.00 g. (The decimal point position
depends on the balance model.)
2 Place a sample on the pan or in the container.
3 Wait for the stabilization indicator to be displayed. Read
the value.
4 Remove the sample and container from the pan.
Notes
To use other units, press the MODE key and select an
appropriate unit.
Press the SAMPLE key to turn on or off the minimum
weighing value.
The weighing data can be stored in memory. For details,
refer to “11. DATA MEMORY”.
When the ON:OFF key is pressed with a container placed
on the weighing pan and weighing is started, the balance
automatically cancels the weight (tare) and displays 0.00 g.