Rice Lake DeckHand/DeckHand Rough-n-Ready System - Manual (Page 12)

8 DeckHand Portable Floor Scale
Figure 3-1 DeckHand Junction Box Cutaway
Replacing Deck Platform
Put the scale flat on the floor and set the platform on the channels so the welded studs drop into the channel holes.
Tilt and block the scale up again and install a flat washer and locknut on each stud. Turn the lock nut onto each stud
until the washer just contacts the channel underside. Do not tighten the lock nuts so the cushioning pads are
compressed. The platform must be free floating for accuracy; the lock nuts merely serve as lift off protection.
CELL 1
CELL 4
CELL 2 CELL 3
INDICA
TOR
+EX –EX
+SI –SI
100 K
+SE –SE +EX
+EX
+EX +EX –EX –EX
–EX
–EX
+SI +SI
+SI
+SI
–SI –SI
–SI
–SI
SHD
SHD
SHD
SHD
23126 Rev
. A
SHD
JU1
JU2 JU3
JU4
100 K
100 K
100 K
(Cells 2 & 3 disabled)