Rice Lake CLS-920 WLAN Option - Manual (Page 5)

5
Set WLAN Configuration Parameters
Once the configuration jumpers are in the ON position, use the following steps to make the necessary settings for
the WLAN option.
Note
Not all devices display information in the same manner and depending on the IT department’s software choice
for configuring the WLAN option, the screens displayed may be different.
If using Lantronix DeviceInstaller, additional information can be accessed at www.lantronix.com.
1. Select the Hyperterminal program on the PC.
2. Enter a name and choose an icon for the connection and press OK .
Figure 7. Hyperterminal Connection Description Screen
3. Select an option for connection.
4. Select the comm port connected to the serial cable
5. Press OK .
Figure 8. Connect To Screen