Rice Lake Chair Scales - Manual (Page 6)

2 Chair Scale Technical and Operating Instructions
2.0 Scale Assembly
2.1 Unpacking Your Scale
Place the unopened box in an open area that has ample room for unpacking the scale.
Parts contained in the shipping box include:
• The scale
• This manual
• Small box containing the AC adaptor and RS-232 cable
2.2 Repacking
If the Digital Chair Scale must be returned for modification, calibration or repair, it must be properly packed with
sufficient packing materials. Whenever possible, use the original carton when shipping the scale back.
NOTE: Damage caused by improper packaging is not covered by the warranty.
2.3 Setting Up Your Scale
Use the following steps to set up the Rice Lake Digital Chair Scale.
1. Using two people, remove the ready assembled chair out of its packaging.
2. Visually inspect the chair scale to ensure the scale is undamaged.
2.4 Optional Footrest Installation Instructions
The Rice Lake Digital Chair Scale comes in two models and both models have an optional fold-up footrest
offering easy access and exit.
Figure 2-1. Digital Chair Scale Shown with Optional Footrest
The following steps instruct the user on how to install the optional footrest.
1. Remove the plastic covering from the chair scale by removing the three screws using a 7mm Allen key
Optional Footrest