ProgressiveRC 6S PowerLog - Manual (Page 13)

-13-
Multifunctional Monitor & Logger PowerLog 6S
SELECT TYPE
⊙LiPo

○Lilo
○LiFe

LiPo
Rename
New Name
ALARM SETTING
Cells Voltag

Pack Voltage
Timer Over
Current
Power
Capacity
Temperature
RPM
Period
Pulse
LiPo
Select

Rename
Alarm&Trigger
Monitor Alarm Settings
The system can have 8 sets alarm settings, press <▲> for 3 seconds to enter SELECT TYPE menu.
The item with  is the current setting.
<▲> or <▼> to select items and press <
> button to confirm.
Defaulted TYPEs are: LiPo, Lilo, LiFe, User1--5
Operate the selected type settings
<▲> or <▼> to select the items, press <
> to enter the next step.
See details below.

Change Present Alarm Type: Select【Select】, Press < > then the item will be with , and the settings
come into effect.

Rename Alarm Type: Select【Rename】, press < > and the screen shows:
New Name Input Method: <▲> to select characters, hold it to trigger
continuously until you get the character you need, the second cycle of
26 characters will be capital letter; <▼> to delete the current
character; <
> to confirm the selected character; press < > for 2
times to confirm the amendment and return; press < > for 3 seconds
to cancel and return.

Alarm Parameters Settings: Select【Alarm&Trigger】, press < > and the screen shows:
<▲> or <▼> to select items, press < > enter the submenu. While
press < > for 3 seconds to return.
See details below.
When setting the alarm items, <▲> or <▼> to increase/decrease value, press < > and then will be
blinking, press <▲> or <▼> to choose /not choose the alarm item, and press <
> again to shift setting
items. Only when it is , the item and set value will take into effect. Press < > for 3 seconds to confirm the
amendment and return.
【MAX.】
the upper limit value
【MIN.】 the lower limit value
【DIFF】 the max measuring difference fluctuation range＝ measured MAX. value－measured Min. value
1. Individual Cell Voltage Alarm Settings: Select【Cells Voltage】, press <
> and the screen shows:
CELL VOLT ALARM applies to the cell voltage in the Cells Monitor
interface.
Setting range
MAX. 0.06V—28.0V MIN. 0.05V—27.99V DIFF 0.01—27.95V
<  >
CELLS VOLT ALARM
MAX. 4.22V 
MIN. 3.00V 
DIFF 0.05V 